Are you experiencing problems with your Breville Bambino Plus espresso machine? Don’t worry, you’re not alone. While the Breville Bambino Plus is a top-of-the-line espresso maker known for its quality and convenience, even the best machines can experience problems from time to time.
In this article, we’ll explore some of the most common Breville Bambino Plus problems and provide you with practical solutions to fix them. Whether you’re struggling with low steam pressure, water leaks, or poor quality espresso shots, we’ve got you covered.
Our step-by-step guides are easy to follow, even if you’re not a seasoned barista. We’ll also provide tips to prevent future occurrences, so you can keep your machine running smoothly and enjoy delicious espresso for years to come.
So, if you’re ready to troubleshoot and fix common Breville Bambino Plus problems, let’s dive in!
Common Breville Bambino Plus Problems
- No water flow
- No steam or low steam pressure
- Machine won’t turn on or off
- Water leaks
- No crema or poor quality espresso shots
1. No Water Flow
If your Breville Bambino Plus is not dispensing water, it could be due to several reasons. The first thing to check is the water tank. Make sure it is properly filled with water. If it is empty or low, the machine won’t dispense water. So, fill up the water tank to the required level.
If the water tank is full, the problem could be due to airlock or a clogged filter. Airlock is a common issue that occurs when air enters the system and stops water from flowing. To fix this issue, turn off the machine and remove the water tank. Now, turn the machine upside down and gently tap the base. This should release the airlock, and water should start flowing again.
If the problem is due to a clogged filter, remove it from the machine and soak it in hot water for 15-20 minutes. This will help to loosen any debris that is blocking the filter. Rinse the filter thoroughly and reinsert it into the machine.
Sometimes, the pump may be the cause of the problem. If the pump is not working, water won’t be dispensed. In this case, it is advisable to contact Breville customer service for repairs.
Another possible reason for the water flow problem could be the blockage in the water system. Mineral buildup or debris can block the pipes and stop the water flow. To prevent this, it is important to descale the machine regularly as per the manufacturer’s instructions. This will help to remove any mineral buildup and keep the water system clean.
2. No Steam or Low Steam Pressure
If your Breville Bambino Plus is not producing steam or has low steam pressure, it could be due to several reasons. One common cause of this problem is the buildup of milk residue in the steam wand.
To fix this, first, turn off the machine and let it cool down. Then, remove the steam wand from the machine and soak it in hot water for 15-20 minutes. This will help to loosen any milk residue that is blocking the steam wand. After soaking, rinse the steam wand with water and reattach it to the machine.
If the problem persists, the steam wand tip could be clogged. In this case, you can use a pin or needle to unclog the tip. First, turn off the machine and let it cool down. Then, remove the steam wand tip and use a pin or needle to clear any blockage. Once the blockage is removed, reattach the steam wand tip and turn on the machine to check if the steam pressure has improved.
Another possible reason for the low steam pressure could be the water tank level. If the water tank is low, it won’t provide enough steam pressure. So, ensure that the water tank is filled to the required level.
If the above steps don’t work, the problem could be due to a faulty steam boiler. In this case, it is advisable to contact Breville customer service for repairs or replacement.
It is important to note that regular maintenance and cleaning of the steam wand can prevent this problem from occurring. After each use, wipe the steam wand with a damp cloth to remove any milk residue. This will help to ensure that the steam wand works efficiently and effectively.
3. Machine Won’t Turn On or Off
If your Breville Bambino Plus espresso machine won’t turn on or off, there could be several reasons for this problem. First, check if the machine is properly plugged into the electrical outlet. Sometimes, the cord can be loose or disconnected, which can prevent the machine from turning on. So, ensure that the cord is securely plugged into the outlet.
Another possible cause could be a tripped circuit breaker or a blown fuse. Check the electrical panel and reset the circuit breaker or replace the fuse if necessary.
If the above steps don’t work, the problem could be due to a faulty power switch or control board. In this case, it is advisable to contact Breville customer service for repairs or replacement.
On the other hand, if the machine won’t turn off, it could be due to a malfunctioning power switch or control board. In this case, you can try turning off the machine by unplugging it from the electrical outlet.
Alternatively, you can turn off the machine by switching off the circuit breaker or removing the fuse. If the problem persists, it is recommended to contact Breville customer service for assistance.
It is important to note that proper care and maintenance of the Breville Bambino Plus can prevent this problem from occurring. Always ensure that the machine is properly plugged in and the circuit breaker is not overloaded. Additionally, perform regular cleaning and maintenance of the machine to prevent any electrical problems.
4. Water Leaks
If you notice water leaking from your Breville Bambino Plus espresso machine, there could be several reasons for this issue. First, check the water tank and ensure that it is properly inserted into the machine. Sometimes, the water tank can become dislodged or not properly secured, which can cause water to leak out of the machine.
Another possible cause could be a malfunctioning steam wand or group head seal. If the steam wand or group head seal is damaged or worn out, it can cause water to leak out of the machine. To fix this problem, you will need to replace the damaged or worn out seal. You can purchase replacement seals online or from a Breville service center.
Additionally, if the machine is overfilled with water, it can cause water to leak out of the machine. Ensure that the water level is below the maximum fill line to prevent any leaks.
If the above steps don’t work, the problem could be due to a faulty valve or pump. In this case, it is advisable to contact Breville customer service for repairs or replacement.
It is important to note that regular maintenance and cleaning can prevent water leaks from occurring. Always ensure that the machine is properly assembled and the seals are in good condition. Regular descaling and cleaning of the machine can also help prevent any leaks.
5. No Crema or Poor Quality Espresso Shots
The Breville Bambino Plus espresso machine is designed to deliver rich, creamy espresso shots with a perfect crema on top. If you notice that your espresso shots are coming out with no crema or are of poor quality, there could be several reasons for this issue.
One of the most common reasons for poor quality espresso shots is improper tamping. If the coffee grounds are not tamped properly, the water will flow through the coffee too quickly, resulting in a weak shot with no crema. To fix this problem, ensure that you are using the right amount of coffee and that it is tamped with the appropriate pressure.
Another possible cause of poor quality espresso shots is the quality of the coffee beans. If the beans are stale or not of high quality, they will not produce a good shot of espresso. Always use freshly roasted beans and grind them just before use to ensure the best possible flavor and crema.
It is also important to check the grind size of the coffee. If the grind is too coarse, the water will flow through too quickly, resulting in a weak shot with no crema. If the grind is too fine, the water will not be able to pass through the coffee, resulting in a choked shot with no crema. Ensure that you are using the right grind size for your Breville Bambino Plus machine.
Finally, if you notice that the water temperature is too low, it can also result in poor-quality espresso shots. Check the machine’s temperature settings and ensure that they are set correctly. If the temperature is still not right, it could be due to a faulty heating element, in which case, it is advisable to contact Breville customer service for repairs or replacement.
Conclusion
While the Breville Bambino Plus is a great machine for making espresso at home, it is not immune to problems that can affect its performance. However, most of these problems can be fixed with some basic troubleshooting and maintenance.
In this article, we have covered some of the most common problems that users of the Breville Bambino Plus may encounter, such as low steam pressure, no water flow, water leaks, and more. We have also provided some helpful tips on how to fix these problems and keep your machine running smoothly.
It is important to remember that regular cleaning and maintenance of your Breville Bambino Plus machine is crucial to avoid these problems. By following the manufacturer’s instructions for cleaning and descaling, you can ensure that your machine remains in top condition and produces high-quality espresso shots every time.
If you encounter a problem that you cannot fix yourself, do not hesitate to contact Breville’s customer service for assistance. Their customer service team is always ready to help and provide support for their products.
A. I. Moon
A.I. Moon, an experienced SEO Pythonista, spends his days coding and developing web applications to help business owners. A passionate coffee enthusiast, he believes that drinking coffee fuels his creativity and productivity. His day isn't complete without the rich aroma and invigorating warmth of a perfectly brewed cup. This love for coffee inspired him to found EspressoRivo, a platform dedicated to sharing his coffee knowledge and fostering a community of passionate aficionados.
